11 Sign Construction Safety Pack J
C710345/CX
Couldn't load pickup availability
Pickup available at The Sign Shed
Usually ready in 2 hoursPairs well with
Make construction site signage easier to organise with our 11 Sign Construction Safety Pack J.
This ready-made pack contains 11 individual safety signs for use around construction and building sites, providing builders, contractors and site managers with a convenient alternative to purchasing each sign separately.
Pack J can be used when setting up a new project, replacing damaged or missing signs, supplementing existing signage or keeping commonly used construction signs available for future work.
What's Included in Construction Pack J?
This pack contains 11 individual Construction Safety Signs:
1 no. 800 x 600 mm Site Safety Protective Footwear sign
1 no. 400 x 300 mm No Unauthorised Persons Allowed Beyond This Point sign
1 no. 400 x 300 mm No Access Unauthorised Personnel sign
1 no. 400 x 300 mm Fire Assembly Point sign
1 no. 400 x 300 mm First Aid First Aiders sign
1 no. 400 x 300 mm 5 mph Slow Sign
1 no. 400 x 300 mm 5 mph Speed Limit Sign
1 no. 400 x 300 mm All Drivers Visitors Must Report To Site Office Sign
1 no. 400 x 300 mm Site Traffic Left Arrow Sign
1 no. 400 x 300 mm Site Traffic Right Arrow Sign
1 no. 400 x 150 mm Construction Site Keep Out Sign
Total: 11 construction safety signs
Best For
Construction Safety Pack J can be a useful choice for:
-
Small-to-medium construction sites
-
New building projects
-
Refurbishment work
-
Builders and contractors
-
Setting up site safety signage
-
Replacing damaged or missing signs
-
Supplementing existing construction signage
-
Keeping commonly used signs available for future projects
Why Choose an 11-Sign Construction Pack?
Buying construction signs as a pack provides a simple way to obtain several commonly used safety messages in one order.
An 11-sign pack offers a broader selection than a small five- or six-sign starter bundle without moving immediately to one of our larger multi-sign construction packs.
This can make Pack J particularly useful for smaller and medium-sized projects or contractors who already own some specialist signage.
Construction Site Entrance Signs
Your site entrance is an important location for communicating safety information.
Where relevant to the signs supplied in Pack J, entrance signage can be used to communicate:
-
Access restrictions
-
PPE requirements
-
Visitor instructions
-
General construction warnings
-
Site rules
Position signs so workers, visitors and contractors can see the information before entering the area where it applies.
PPE Signs
Where personal protective equipment is required, PPE signage can reinforce instructions for equipment such as:
-
Safety helmets
-
High-visibility clothing
-
Safety footwear
-
Eye protection
-
Hearing protection
-
Protective gloves
Only display PPE requirements that actually apply to the site or work area.
Additional PPE Signs can be added to Pack J where more specific requirements apply.
Hazard & Warning Signs
Construction projects can involve hazards that aren't covered by a general sign pack.
Depending on the project, additional signs may be required for:
-
Deep excavations
-
Electrical hazards
-
Overhead cables
-
Underground services
-
Demolition
-
Asbestos
-
Confined spaces
-
Moving vehicles
-
Falling objects
Select additional warning signs according to the hazards present on the individual site.
Fire & Emergency Signs
Construction sites may also require appropriate fire and emergency information.
Depending on the site's arrangements, this can include signage identifying:
-
Fire exits
-
Fire points
-
Fire extinguishers
-
Fire action information
-
First-aid facilities
-
Assembly points
Emergency signage should reflect the actual arrangements on the project.
Where Should the 11 Signs Be Displayed?
Don't automatically position all the signs together.
Each safety sign should be installed where its particular message is relevant.
For example:
Site entrance: Access, visitor and general PPE information.
Site perimeter: Keep Out and appropriate warning signs.
Work areas: Hazard-specific and additional PPE signs.
Traffic routes: Vehicle and pedestrian instructions.
Fire points: Relevant fire-safety signs.
First-aid location: First Aid signs.
Assembly area: Assembly Point signs.
The objective is to provide the right information at the point where people need it.
Does Pack J Include Every Sign My Construction Site Needs?
Not necessarily.
There is no single standard set of safety signs suitable for every construction project.
The appropriate signs depend on factors such as:
-
Work activities
-
Hazards
-
Site layout
-
Access arrangements
-
PPE requirements
-
Vehicle and pedestrian movements
-
Fire arrangements
-
First-aid provision
-
Contractors and visitors
-
Risks to members of the public
Check the contents of Pack J against the project's risk assessments and site arrangements.
Additional signage may be required for hazards or activities not covered by the pack.
Construction Safety Signs & BS EN ISO 7010
Many construction safety signs use graphical symbols standardised by BS EN ISO 7010.
Recognised symbols provide consistent visual communication for warnings, mandatory instructions, prohibitions and emergency information.
BS EN ISO 7010 is a safety-symbol standard rather than construction legislation itself.
Using recognised symbols doesn't automatically make a construction site legally compliant. Signs should be selected according to the actual hazards and safety arrangements for the project.
Construction Signs Don't Replace Other Safety Measures
Safety signage communicates warnings, instructions and information.
It doesn't replace appropriate measures such as:
-
Site security
-
Barriers
-
Edge protection
-
PPE provision
-
Traffic management
-
Training
-
Supervision
-
Safe systems of work
Construction signs should support the wider controls in place on the project.
Need Additional Construction Signs?
Pack J can be supplemented with individual signs according to the requirements of your project.
Explore:
-
Construction Safety Signs
-
PPE Signs
-
Hazard & Warning Signs
-
Mandatory Safety Signs
-
Fire Safety Signs
-
First Aid Signs
-
Electrical Safety Signs
-
Site Safety Boards
-
Site Safety Banners
For projects requiring substantially more individual signs, one of our larger Construction Sign Packs may provide a more convenient option.
Made in Britain
Safety Sheep Construction Safety Signs are Made in Britain for builders, contractors and construction projects throughout the UK.
Our 11 Sign Construction Safety Pack J provides a convenient way to purchase a selection of commonly used site signage in one bundle.
Think Safety. Think Sheep.
11 Sign Construction Safety Pack J
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
We aim to dispatch your order within one working day
For more information on delivery rates and times click here
-
Customer Support
For help with ordering, sales enquiries or general customer service, call us on 0345 5480 777 or email sales@safetysheep.co.uk
Product details
UK Health & Safety Regulations
The Health and Safety at Work Act (HSWA) 1974 is a foundational law in the UK for workplace health and safety. It outlines the general duties of various parties to ensure a safe work environment. Here's a quick summary: Duty of Employers: Employers must provide a safe workplace, ensure the health, safety and welfare of their employees and anyone else on the premises (visitors, contractors etc.). This includes providing adequate training, information, and supervision. Employee Duties: Employees have a duty to take care of their own health and safety and that of others around them. This includes following safety procedures and using equipment properly. Other Duties: The Act also places duties on those responsible for premises, manufacturers of equipment used at work, and the self-employed. Safety signage is one way employers can fulfill their duty to inform and instruct employees. Signs can warn of hazards, provide instructions for safe use of equipment, and delineate emergency exits. While HSWA outlines general principles, specific regulations and Approved Codes of Practice (ACOPs) provide more detailed guidance on workplace health and safety practices. For up-to-date information, you can refer to the Health and Safety Executive (HSE) website https://www.gov.uk/health-and-safety-executive.
Safety Signs Size Guide
Your Safety Signs Size Conversion Guide
Need to convert millimetres to feet and inches for your signage? Our comprehensive guide provides accurate measurements in both metric and imperial units, helping you find the perfect size for your sign.
300 x 100 mm - 12" x 4"
200 x 150 mm - 8" x 6"
A4 (297 x 210 mm) - 12" x 8"
400 x 150 mm - 16" x 6"
400 x 300 mm - 16" x 12"
A2 (594 x 420 mm) - 24" x 17"
600 x 200 mm - 24" x 8"
800 x 600 mm - 32" x 24"
Sizes in inches (") are approximate
Sign Materials Guide
Choosing the right material for your safety signs is crucial for ensuring their effectiveness and durability. We proudly manufacture all our signs in Britain. Let us guide you in selecting the most suitable material for your signs.
Self-adhesive stickers
Self-adhesive stickers are ideal for indoor usage. We use superior-quality Metamark digital vinyl, which is a durable and flexible material with an adhesive backing. Prior to applying the sticker, ensure that the surface is flat, smooth, and clean. While the vinyl is waterproof, we do not recommend outdoor usage unless the surface is deemed appropriate. It is important to note that vinyl stickers do not stick to wood, rendered, wood chip, brick or stone walls, concrete, or similar surfaces. In such cases, we suggest considering alternative materials such as recycled plastic or composite aluminium. Please be aware that Self-adhesive stickers, such as Dulux Easycare Matt Emulsion paint, will not adhere to newly formulated washable, "wipe clean" painted surfaces. If you have any uncertainties or inquiries, feel free to ask us. Additionally, we advise against attempting to independently apply Self-adhesive stickers larger than A4 size, as it may be more challenging than anticipated.
Recyclable Plastic
Introducing Polyline Bubble Board, the latest innovation in the sign industry, made from 100% recyclable polypropylene. Manufactured in the EU by Pyramid, this eco-friendly material offers an impressive strength-to-weight ratio, with a smooth, flute-free surface—unlike Correx.
The Bubble Board features a fire-retardant (FR) black core, making it an ideal choice for projects that require enhanced safety measures. Suitable for both indoor and outdoor use, it is UV-treated for excellent weather resistance, and its scratch-resistant surface outperforms traditional Foamex. Fully recyclable through the No.5 waste stream, Bubble Board is a sustainable and reliable option for UK safety signage.
Rigid Plastic
Rigid Plastic Signs are commonly used for safety signs due to their durability and lightweight design. Our Plastic 1mm option is lightweight and durable, providing waterproof qualities. It is suitable for both indoor and outdoor use. Fixing holes can be drilled in the plastic at no additional cost.
We take pride in being the inaugural online sign manufacturer in the UK to present our complete product line of health and safety signs and general signage in 50% recycled plastic. Our new 3mm waterproof recycled plastic, which is bright white in colour, is suitable for both indoor and outdoor use and is more eco-friendly compared to traditional rigid plastic. It possesses the same surface qualities as rigid and foamed plastic but incorporates a lighter recycled foam PVC centre. Furthermore, this material is 100% recyclable and offers an exceptional printing surface for various signage applications. You have the option to drill fixing holes or use foam adhesive pads on the back for mounting the signs.
Aluminium Composite
Our Metal Signs, constructed from Aluminium Composite (Dibond Signs), are specifically crafted for outdoor usage. The aluminium composite consists of a non-aluminium core bonded between two thin sheets, resulting in a sturdy and weather-resistant sign. We utilize 3mm thick composite aluminium, sourced from ALUPANEL in Britain. This material is produced from at least 80% recycled materials and is completely recyclable. It can be easily drilled to install holes, and we provide pre-drilled holes upon request at no extra cost. Dibond signs are well-known for their durability and long lifespan, making them a fantastic option for outdoor signage.
Foamex
Foamed Plastic Signs, or Foamex, are a popular choice for temporary construction site safety boards. This material is durable yet lightweight, weatherproof, and specifically designed for outdoor signage. Our foamex is 3mm thick and has a white matte finish.
Correx
Fluted Polypropylene, also known as Correx, is designed for temporary signage, especially in the construction industry. It offers a cost-effective and lightweight solution for short-term signage needs.
Banners
Here are the details about our banner options:
Standard and Premium Banner Materials
We offer a standard 440gsm PVC Banner, which is lightweight, weather-resistant, flame-resistant, and has a gloss finish. It is suitable for indoor and short-term outdoor use.
- Our Premium 510gsm Extra-Strong PVC Banner is designed for higher tear resistance and durability. It is weather-resistant, suitable for indoor and long-term outdoor use, and meets UK and European fire safety standards. It has a satin finish.
Mesh Banner Material
- The 260gsm MESH Banner is perfect for windy areas, as its perforated design allows wind and some light to pass through, preventing ripping.
All our banners are printed with high-quality, eco-friendly UV inks. They are hemmed and eyelet for easy fixing, and cable ties are provided at no extra charge.
If you have any further questions or need assistance, please feel free to contact us.
Official Made in Britain Member
The Safety Sheep Store is proud to be a member of the Made In Britain organisation.
Frequently Asked Questions About Construction Site Signs
What are the required safety signs for a UK construction site?
Under Health and Safety Executive (HSE) guidelines and the Construction (Design and Management) Regulations (CDM 2015), building sites must prominently display a mix of mandatory signs (e.g., "PPE Must Be Worn"), prohibition signs ("No Unauthorised Access"), hazard warnings ("Danger Construction Site"), and clear fire exit route markers. Our multi-message site safety boards combine all these necessary warnings onto a single layout.
Which sign material is best for temporary scaffolding and building sites?
For temporary construction environments, Fluted Polypropylene (Correx) and Foamed Plastic (Foamex) are highly recommended. Correx is incredibly lightweight, waterproof, and easily attached to scaffolding grids or fencing using cable ties. For longer-term development projects or hoarding displays, we suggest upgrading to rigid plastic or durable aluminium composite (dibond) panels.
Do you offer bulk trade pricing for large construction projects?
Yes, we specialise in supplying trade accounts and major contractors across the UK. The Safety Sheep Store offers bulk trade discounts of up to 35% on multi-packs and volume orders. All our building site signs are proudly manufactured in our Yorkshire facility, allowing us to pass direct factory savings straight to your project budget.